june 2011 doc id 13533 rev 4 1/10 10 st13003-k high voltage fast-switching npn power transistor features high voltage capability low spread of dynamic parameters very high switching speed applications electronic ballast for fluorescent lighting (cfl) smps for battery charger description the device is manufactured using high voltage multi-epitaxial planar technology for high switching speeds and high voltage capability. it uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide rbsoa. figure 1. internal schematic diagram sot-32 3 2 1 table 1. device summary part number marking package packaging st13003-k 13003 sot-32 bag www.st.com
electrical ratings st13003-k 2/10 doc id 13533 rev 4 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit v ces collector-emitter voltage (v be = 0) 700 v v ceo collector-emitter voltage (i b = 0) 400 v v ebo emitter-base voltage (i c = 0, i b = 0.75 a, t p < 10 s) v (br)ebo v i c collector current 1.5 a i cm collector peak current (t p < 5 ms) 3 a i b base current 0.75 a i bm base peak current (t p < 5 ms) 1.5 a p tot total dissipation at t c = 25 c 40 w t stg storage temperature -55 to 150 c t j operating junction temperature -40 to 150 c table 3. thermal data symbol parameter value unit r thjc thermal resistance junction-case max. 3.1 c/w
st13003-k electrical characteristics doc id 13533 rev 4 3/10 2 electrical characteristics t case = 25 c unless otherwise specified. table 4. electrical characteristics symbol parameter test cond itions min. typ. max. unit i ces collector cut-off current (v be = 0) v ce = 700 v v ce = 700 v t c = 125 c 1 5 ma ma v (br)ebo emitter-base breakdown voltage (i c = 0) i e = 10 ma 9 18 v v ceo(sus) (1) 1. pulsed duration = 300 s, duty cycle 1.5% collector-emitter sustaining voltage (i b = 0) i c = 10 ma 400 v v ce(sat) (1) collector-emitter saturation voltage i c = 0.5 a _ i b = 0.1 a i c = 1 a _ _ i b = 0.25 a i c = 1.5 a _ _ i b = 0.5 a 0.5 1 1.5 v v v v be(sat) (1) base-emitter saturation voltage i c = 0.5 a _ i b = 0.1 a i c = 1 a _ _ i b = 0.25 a 1 1.2 v v h fe dc current gain i c = 0.5 a v ce = 2 v i c = 1 a v ce = 2 v 8 5 20 25 t r t s t f resistive load rise time storage time fall time v cc = 125 v i c = 1 a i b1 = 0.2 a i b2 = - 0.2 a t p = 25 s 1 4 0.7 s s s t s inductive load storage time i c = 1 a i b1 = 0.2 a v be = - 5 v l = 50 mh v clamp = 300 v 0.8 s
electrical characteristics st13003-k 4/10 doc id 13533 rev 4 2.1 electrical characteristics (curves) figure 2. safe operating areas figure 3. derating curve figure 4. output characteristics figure 5. reverse biased safe operating areas figure 6. dc current gain (v ce = 1 v) figure 7. dc current gain (v ce = 5 v)
st13003-k electrical characteristics doc id 13533 rev 4 5/10 2.2 test circuits figure 12. resistive load switching test circuit 1. fast electronic switch 2. non-inductive resistor figure 8. collector-emitter saturation voltage figure 9. base-emitter saturation voltage figure 10. inductive load switching time fi gure 11. resistive load switching time
electrical characteristics st13003-k 6/10 doc id 13533 rev 4 figure 13. inductive load switching test circuit 1. fast electronic switch 2. non-inductive resistor 3. fast recovery rectifier
st13003-k package mechanical data doc id 13533 rev 4 7/10 3 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark.
package mechanical data st13003-k 8/10 doc id 13533 rev 4 figure 14. sot-32 (to-126) drawings table 5. sot-32 (to-126) mechanical data dim. mm. min. typ. max. a2.4 2.9 b 0.64 0.88 b1 0.39 0.63 d 10.5 11.05 e7.4 7.8 e 2.04 2.29 2.54 e1 4.07 4.58 5.08 l 15.3 16 p2.9 3.2 q3.8 q1 1 1.52 h2 2.15 i1.27 0016114e
st13003-k revision history doc id 13533 rev 4 9/10 4 revision history table 6. document revision history date revision changes 23-may-2007 1 initial release. 09-jul-2008 2 added table 1 on page 1 . 15-dec-2009 3 added table 3: thermal data on page 2 . 15-jun-2011 4 modified: ta b l e 2
st13003-k 10/10 doc id 13533 rev 4 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2011 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
